Friday, 9 May 2014

Remove scratches and give the perfect look to your bamboo flooring



If you notice scratches on your flooring, then there’s nothing to worry about; in fact, it’s a very common phenomenon. Whether it’s marble, wood or bamboo, scratches are a common issue. While you cannot guide everyone on how to walk on these bamboo floors, you can definitely mend the scratches and give it a brand new look. Scratches are a big turn-off and you must fix them as soon as you notice them on your floors. If you’ve chosen bamboo for your home/business flooring, then you must consider the below mentioned steps to wipe out the scratches. 

http://tflooring.com.au/product/laminate-flooring/

·         Step 1: Clean the surface where the scratches have been noticed. Wipe it with damp paper towels. Get rid of all the dirt on the surface, so the scratches are very prominent. If there are other scratches or scuffs across the floor, clear those areas in the similar way. Wait until the floor is completely dry. Wipe the floor with a dry paper towel to speed up the drying process.
·         Step 2: Cover up the flooring area adjacent to the scratch. You may use a masking tape to keep the unscratched areas protected, while you are doing the repair work. Use the tapes in such a way that the surrounding area remains unharmed, while you have access to the affected area alone.
·         Step 3: Apply a small quantity of wood putty on the areas that are scratched. You should abide by the manufacturer’s instructions to avail the best results. Remove any excess putty by using a wet paper towel. Now, let the putty dry out completely.
·         Step 4: Sand the putty very gently using fine grit sandpaper. This will create a smooth surface to work on. If the putty has sunk below the flooring level, consider applying another layer.
·         Step 5: Next, remove all the tapes from the area and apply thin coating of polyurethane sealer. Make use of sealer to fill the scratches and its surrounding areas. Use a foam brush for good results. Use the floor only after the sealer has completely dried off.

Using these simple steps, you can give a flawless look to your bambooflooring in Sydney. For installation, maintenance, sanding and polishing in Sydney, seek help of the best flooring professionals around.